|
To view
Demonstration of this machine, move pointer over image below.
![]()
Precision Made Simple
|
Technical
Specifications |
| Ajex make
tungsten carbide die working equipment is the ideal solution
for grinding and polishing of the entire range of Tungsten
Carbide dies, extrusion dies, cold heading dies, wire drawing
dies.
The machine consists of a high speed grinding spindle and a
die table. The needle fixing is by collet arrangement. a three
inch jaw chuck is used to hold the dies. The spindle speed is
fixed. The spindle stroke length and die speed can be varied.
The machine is designed for working bearing positions and
reduction angle in one setting. |
Horizontal Model |
: |
TCD 11 |
| Spindle Speed |
: |
6000 rpm (fixed) |
| Stroke Length |
: |
0 - 20 mm |
| Die Size |
: |
0.80 to 18 mm |
| Die Speed |
: |
0.300 rpm variable |
| Input Volt |
: |
220V, 50Hz |
| Collect Dia |
: |
3,4,5 & 6 mm |
| Weight |
: |
88 Kgs |
| Length |
: |
36" |
| Width |
: |
17" |
| Height |
: |
15" - 16" |
| Generator |
| Weight |
: |
12.5 Kgs |
| For
Best Results always use Ajex Diamond Powders & Paste,
Angular Pins, Hand Files, Boron Carbide Powder & Paste. |
Length |
: |
17" |
| Width |
: |
16" - 17" |
| Height |
: |
9" |
|