|
To view
Demonstration of this machine, move pointer over image below.
![]()
|
Precision Made Simple
|
|
| The wire
wire type die polishing system from AJEX Wire Die provides
superior die precision and quality to maximise the
cost-effectiveness of in house die re-cutting. Economical and
easy to use, the wire polish allows you to maintain exact
standards for polycrystalline, Natural and Mono Diamond Dies.
The Machine is manufactured with precision engineering. It
consists of a spring loaded wire tension system and an
oscillating self centering type Die Holder. Die rotation and
stroke speeds are variable. Individual controls are provided.
|
Technical
Specifications
|
| Model |
WPM-1 |
WPM-2 |
WPM-3 |
| Spindle |
Single |
Two |
Three |
| Stroke Length |
70 mm |
70 mm |
70 mm |
| Die Size |
0.50 to 2.50 |
0.50 to 2.50 |
0.50 to 2.50 |
| Stroke Speed |
250 st/min |
250 st/min |
250 st/min |
| Die Speed |
2500 rpm |
2500 rpm |
2500 rpm |
| Die Swing |
0.40' (20' each side) |
0.40' (20' each side) |
0.40' (20' each side) |
| Timer |
1 sec - 999 min |
1 sec - 999 min |
1 sec - 999 min |
| Input Volt (Single) |
220 V, 50Hz |
220 V, 50Hz |
220 V, 50Hz |
|
|
|
We have Different
Models
|
A. Fine Die Polishing
Machine
|
| Model |
FWPM-1 |
FWPM-2 |
FWPM-3 |
| Die Size
|
0.010 - 0.800 mm |
0.010 - 0.800 mm |
0.010 - 0.800 mm |
B. RBD Die Polishing Machine
|
| Model |
JWPM-1 |
JWPM-2 |
|
| Die Size
|
1.00 - 10.00 mm |
1.00 - 10.00 mm |
|
C. Six Head Wire Polishing
Machine
|
| Model |
WPM-666 |
|
|
| Die Size |
0.05 - 3.00
mm
(Non-Oscillating) |
|
|
|
| For
Best Results always use Ajex Diamond Powders & Paste,
Angular Pins, Hand Files, Boron Carbide Powder & Paste. |
